Drobe :: The archives
About Drobe | Contact | RSS | Twitter | Tech docs | Downloads | BBC Micro

Castle announces ARM9 MiMagic 5 support

By Chris Williams. Published: 29th Nov 2004, 16:48:09 | Permalink | Printable

Only 220MHz but still exciting, if you want ROS in a PDA [Updated]

Castle logoCastle have announced RISC OS support for NeoMagic's MiMagic 5 processor range. The MiMagic application processor is a 220MHz 32bit ARM9 core wrapped in a host of I/O and LCD monitor interfaces, and is aimed at wireless PDAs, handheld information appliances and other embedded kit.

Clearly not aimed at desktop use, the MiMagic 5 chip packs the following features:
  • ARM922T 220 MHz 32-bit ARM core
  • Dual independent 32-bit DMA bus configuration and dynamically assignable DMA controller.
  • Very low system power consumption.
  • Frequently used code can be stored in the SRAM.
  • Multiple power down modes.
  • Multimedia Enhancement Hardware-assist for video streaming and decoding.
  • Digital camera interface.
  • Low system cost.
  • Supports low cost NAND Flash.
  • Rich set of peripherals: SD Card, SDIO, MultiMediaCard, USB, serial, and audio.
  • Multiple Boot Options: Linear Flash, NAND Flash, UARTs, SD, MMC, or Serial EPROM.
  • Video support up to 800x600.

No prices or release dates are mentioned, but development boards will be available from Castle at some point. For the impatient, Castle will be demonstrating a MiMagic 5 powered RISC OS 5 computer at the Midlands RISC OS show this Saturday.

Following the news of the A9, the RISC OS future certainly looks portable - playing heavily on the OS's original motto of 'doing more with less'. Its small footprint, modular ROM based nature, and straight forward GUI are the assets that appear to be making the OS attractive to outside customers.

It also demonstrates the flexibility of modern ARM cores, in that silicon developers can pick up a core, pack in extra features (such as wireless and LCD support) as required and produce a custom processor to suit their needs - especially with high speed ARM9 cores rumoured to be in hands of third parties developing kit that use the ARM family.

We're also told that the support for MiMagic 5 was introduced after Castle's embedded arm, Tematic, have been working with un-named OEMs.

Update at 04:04 1/12/2004
We asked Castle if they could name the OEMs that they've been working with. CTL boss Jack Lillingston had this to say: "At the moment I can't name any OEMs (that is the nature of the companies we do business with). Also we have some high powered customers purchasing IYONIX pcs for evaluation and development, including major silicon designers and major telecoms companies."

We'll also have to wait and see on the price of the development board, too.


MiMagic 5 support for RISC OS 5 announcement Castle website

Previous: OpenOffice ARM port
Next: November news in brief


Viewing threaded comments | View comments unthreaded, listed by date | Skip to the end

Good news, indeed!

 is a RISC OS Userhzn on 29/11/04 4:59PM
[ Reply | Permalink | Report ]

2nded. most definately good news.

 is a RISC OS Usersa110 on 29/11/04 5:01PM
[ Reply | Permalink | Report ]

:-) happy days, PDA's here we come :-)

 is a RISC OS Userleeshep on 29/11/04 5:33PM
[ Reply | Permalink | Report ]

"The addition of the MiMagic 5 to the ever growing list of processors that RISC OS supports, is a considerable benefit for the wider RISC OS community." - Is the embedded market part of "the wider RISC OS community"? If not, than this means this will surface in some way as a consumer product interesting for the enthousiastic market?

 is a RISC OS Userjjvdgeer on 29/11/04 6:40PM
[ Reply | Permalink | Report ]

I hope so. *waves credit card*

 is a RISC OS Usermonkeyson on 29/11/04 8:48PM
[ Reply | Permalink | Report ]

Looks very promising.

Lets hope it gets a few more people to the ARM Club show.

 is a RISC OS UserRevin Kevin on 29/11/04 8:57PM
[ Reply | Permalink | Report ]

Wonder how many pennies this little beastie will be? Unfortunately, I can't make the show this weekend to find out :-(

...but I am looking forward to it performing better that all those WinCE PDA's that are floating around? :-)

Incidentally, is it true that 'WinCE' stands for 'Windows Childrens Edition'? ;-)

 is a RISC OS UserTrippy on 29/11/04 9:52PM
[ Reply | Permalink | Report ]

If it is aimed at the embedded market I doubt that they'll sell it to you anyway, or that it would be that much use.

 is a RISC OS UserAndrewDuffell on 29/11/04 10:14PM
[ Reply | Permalink | Report ]

If it was aimed at the embedded market then surely the press release would be from Tematic not castle.

 is a RISC OS UserRevin Kevin on 29/11/04 10:51PM
[ Reply | Permalink | Report ]


The week after I buy myself a PDA.

 is a RISC OS UserJWCR on 29/11/04 11:11PM
[ Reply | Permalink | Report ]

"...but I am looking forward to it performing better that all those WinCE PDA's that are floating around?"

I doubt it - this is an 200MHz ARM processor, not likely to be anywhere near a 400MHz XScale or 300MHz MIPS etc.

Jees, even people are saying the Sharp Zaurus is too slow - this thing will crawl.

Plus WinCE (or PocketPC, or Linux) has many more years of development than a hacked together version of RO5 (itself pretty hacked together!) with a new HAL.

Hey at least its low power, the battery will last forever, but the tasks will take twice as long to do, so you'll need the battery life!

 is a RISC OS Usersimo on 29/11/04 11:51PM
[ Reply | Permalink | Report ]

"Multimedia Enhancement Hardware-assist for video streaming and decoding" "MultiMediaCard" I don't know of MiMagic5, but it sounds like we are getting our RO hardware set up for Multimedia (Cino) and is it for portables only at this stage?? Sounds most promising :-)

 is a RISC OS UserSawadee on 29/11/04 11:57PM
[ Reply | Permalink | Report ]

Simo Interesting comparison in your comments.

Thinking about that though, at least something for a start is still better than nothing for RISC OS.

RO has a few years of development to catch up to. I too wonder from your comments why the 200MHZ ARM processor and not the 400MHZ XScale, there must be a reason?

 is a RISC OS UserSawadee on 30/11/04 1:45AM
[ Reply | Permalink | Report ]

simo ARM Linux on an Iyonix seems significantly slower than RO5. A 200MHz RiscPC seems a lot faster than a 200MHz Psion Netbook.

Thus RISC OS seems to run better on slower processors than other OS's. I realise am not consistently comparing like for like, and that hardware (and software) differences say between the Psion and RiscPC make up some of the speed difference. The Zaurus runs a flavour of Linux as an OS.

I'd be very surprised (bearing in mind max screen resolution of 800x600) if a Mi Magic 5 based machine running RO5 was so slow as to be practically unusable.

All in all very good news.

 is a RISC OS Userblahsnr on 30/11/04 7:17AM
[ Reply | Permalink | Report ]

simo: what do you base your justifications on? Please, some references and not guesses.

"people are saying the Sharp Zaurus is too slow". But the Zaurus et al run WinCE/Linux, not RISC OS. In any case, your presumption avoids the issue that their are a variety of XScale processors with associated architectures.

I suggests that this ARM9 device runs in practice around the same speed as a PXA255 devices, and probably noticeably faster in many instances than a RiscPC (having faster bus, memory, etc).

 is a RISC OS Usermrchocky on 30/11/04 8:55AM
[ Reply | Permalink | Report ]

this is GUESS, but... from the characteristics, this processor seems tailored for 3G mobile handsets. Camera, streaming video, variety of storage devices... Oh well, time for a RO mobile phone?

 is a RISC OS Userbernie on 30/11/04 9:54AM
[ Reply | Permalink | Report ]

Generally RISC OS feels very fast, because it acts quickly on interrupts caused by user inputs. Processing large amounts of data is not one of its strengths.

 is a RISC OS UserJGZimmerle on 30/11/04 10:03AM
[ Reply | Permalink | Report ]

Sound like fun to me. Has anyone got a RON yet?!

 is a RISC OS Userharmsy on 30/11/04 11:28AM
[ Reply | Permalink | Report ]

To me, RISC OS doesn't necesarily feel fast, but it feels predictable, i.e. I already know how long it will take to do something so I can do things at maximum speed. With windows I'm never quite sure whether it's crashed or it's going to catch up with me in a min (wheras RISC OS tends to make it obvious most of the time :) Having said that, I can't remember the last time I had to reboot due to RISC OS crashing altogether. Oregano sometimes randomly disappears, but no OS crashes.

 is a RISC OS Userjohn on 30/11/04 1:23PM
[ Reply | Permalink | Report ]

"years of development than a hacked together version of RO5"

Isn't this how all work in the world is done? Can't remember the last time I used anythign without it going wrong at some stage.

Sounds promising, Im sure Castle have somethign bigger up their sleave.....Lets see what happends!

 is a RISC OS Userem2ac on 30/11/04 2:23PM
[ Reply | Permalink | Report ]

Perhaps the parket most suited to this is portable bio/medical imaging. Think hand-held ultrasound scanners, field medical diagnostics etc where low weight (lack of large batteries) etc counts a lot and where a desktop style interface rathere than a PDA interface is preferable. Of course I'm just speculating that it may be in my field. :-) Indeed I think it was 6 years ago I mentioed that this si a possible market so i'm probably wrong. AGAIN :-)

Cheers Bob

 is a RISC OS Usernijinsky on 30/11/04 4:40PM
[ Reply | Permalink | Report ]

Oh here is another idea. A portable barcode scanner. they normaly sell for the price of an iyonix. :-) see [link]

Cheers bob

 is a RISC OS Usernijinsky on 30/11/04 7:46PM
[ Reply | Permalink | Report ]

Before folks get carried away you should look at the state of NeoMagic....not healthy.

 is a RISC OS Usermripley on 1/12/04 3:29PM
[ Reply | Permalink | Report ]

Nice to see some high powered customers for castle as well with the IYONIX lets hope they like them.

 is a RISC OS UserRevin Kevin on 1/12/04 8:47PM
[ Reply | Permalink | Report ]

it's nice to finally get owner of risc os who seen interested in actually trying to get it into other peoples products. It would be nice if there were a PDA produced for the general market with RO rather than just aiming it at existing users.

 is a RISC OS Userjess on 1/12/04 9:49PM
[ Reply | Permalink | Report ]

Please login before posting a comment. Use the form on the right to do so or create a free account.

Search the archives

Today's featured article

  • RISC OS features in plain english
    A brave stab at bringing all the feature lists together into one easy to understand summary
     30 comments, latest by bucksboy on 16/1/06 6:56PM. Published: 14 Jan 2006

  • Random article

  • News in brief
    A Santa sleigh of updated freeware software and more
     10 comments, latest by diomus on 25/1/09 12:02PM. Published: 20 Dec 2005

  • Useful links

    News and media:

    Top developers:
    RISCOS LtdRISC OS OpenMW SoftwareR-CompAdvantage SixVirtualAcorn

    CJE MicrosAPDLCastlea4X-AmpleLiquid SiliconWebmonster


    RISCOS.org.ukRISCOS.orgRISCOS.infoFilebaseChris Why's Acorn/RISC OS collectionNetSurf

    Non-RISC OS:
    The RegisterThe InquirerApple InsiderBBC NewsSky NewsGoogle Newsxkcddiodesign

    © 1999-2009 The Drobe Team. Some rights reserved, click here for more information
    Powered by MiniDrobeCMS, based on J4U | Statistics
    "It burns my eyes!"
    Page generated in 0.1884 seconds.