Cooling a RiscPCBy Robert Greenfield. Published: 27th Jul 2005, 23:28:50 | Permalink | Printable
Like, chill out, manDespite it being winter right now in New Zealand, NZ RISC OS dealer Robert Greenfield has a few ideas on how to keep a RiscPC cool in the summer months.
Air flow in a computer is an important factor that, some argue, Acorn overlooked in the RiscPC design. Components in a computer produce heat which needs to be taken away to reduce the chances of overheating and subsequent failure. The easiest and cheapest way of doing this is to get air blowing across the warmer bits and pieces to transfer away the thermal energy. Unfortunately for us, the airflow in a RiscPC is not terribly good, so this article has some ideas to fix this.
The first idea below came from Mal of Australian dealer The Imagefactory, where it can obviously get very hot in the summer. The ARM based processors in our RISC OS powered hardware are efficient and produce little heat, however some peripherals such as hard discs do, especially newer and faster models; if they get too hot, they can fail prematurely.
Airflow in the RiscPC is worse in multi-slice machines. Experiments undertaken in extensive lab facilities (aka Mal's office) at The Imagefactory found that the airflow could be improved by simply sealing the power supply air intake to the case. I was able to do this using draught excluding strips as used on doors and windows. This does makes the bottom slice slightly more difficult to take on and off, but it prevents the case fans from recycling the air inside the computer.
Close up of the insulation foam sealing off the PSU air intake
The RiscPC PSU with foam lining its underside
The next step recommended by The Imagefactory is to fit a fan in the top slice to blow out the hot air that rises. Mal fitted a 3.5" HD300 fan to a podule slot whereas I used a smaller fan for the hole where the rear of the PSU would go, because my top slice is really a bottom slice. These two factors help the air to flow in at the bottom and upwards. Heat rises up through the case, so this is a good thing.
Overhead view of Mal's podule slot fan
External view of Mal's fan, at the back of his RiscPC stack
Finally, to improve air flow, I blocked off the unused side vents in the slice above the PSU in order to promote airflow from the bottom to the top of the case. Currently it is winter here in New Zealand, so I hope these ideas are beneficial to users in the sunny UK.
RiscPC hard discs die in hot weather
Previous: MicroDigital incommunicado
Next: News in brief
DiscussionViewing threaded comments | View comments unthreaded, listed by date | Skip to the end
Please login before posting a comment. Use the form on the right to do so or create a free account.
Search the archives
Today's featured article
The new apple of my eye
Would you swap your dusty Acorn for a polished Apple computer? Martin Hansen has been checking out the world of Steve Jobs and his range of shiny kit.
15 comments, latest by adh1003 on 6/1/09 1:06PM. Published: 17 Nov 2008
TechWriter to get Word 2k export
Open format shunned by punters
23 comments, latest by davidb on 4/12/06 10:36AM. Published: 23 Nov 2006
News and media:
RISCOS Ltd •
RISC OS Open •
MW Software •
Advantage Six •
CJE Micros •
Liquid Silicon •
Chris Why's Acorn/RISC OS collection •
The Register •
The Inquirer •
Apple Insider •
BBC News •
Sky News •
Google News •